Easy Joint Paving Jointing Compound 12.5kg – Mushroom

Product Information

This ensures the top of the filler is below the top rounded edge of the paving and helps it adhere to the base and sides of the paving material. As well as the options provided below, you can choose to restrict or block cookies through your browser settings at any time. Freezing weather will cause the process to virtually cease and it can take many days for the joints to set hard. A stronger mix may cause the base to become impermeable and this will mean that water does not drain away.

They offer the best possible combination of advanced technological formulations and environmentally friendly raw materials. To achieve this, assuming a permeable sub-base, where a mortar bedding is used it should be no stronger than 6 parts sand to 1 part cement (6:1).Market-leading EASYJoint is ideal for all types of paving such as natural stone, limestone, porcelain, sandstone, Yorkstone, Indian Stone, granite setts and concrete flags. We have a friendly team of paving specialists that will help ensure you create the right paving for your needs. This will assist in checking for low spots while ensuring the joints are uniformly below the surface of the paving. When used correctly and the EASYJoint instructions are followed there will be no staining or hazing to the paving. If using the wet method, ensure that the bedding mix is permeable and made up from a mix no stronger of 6 parts sharp sand to one cement.

No it shouldn't if used correctly by following our instructions, however there is always a chance that the Linseed oil will seep into the paving. Maintain the Width of Joint Throughout Maintain at least a 3mm gap width throughout the depth of the paving material. Lock in the Joint An irregular “V” shaped joint means that any type of filler will have difficulty staying in place.EASY Joint will always go rock hard as soon as it is in contact with the air, it does not need water to cure.

Work conscientiously not to leave any grains of sand on the surface or the rainbow effect caused by the linseed oil. Less water is needed when applying EASYJoint to porcelain paving, as there is little risk of residue staining. Simply simply soak the paving with water before you start and then sweep and wash the jointing compound into the joints, letting the water take the strain.

The best solution would be to get it laid as recommended by the suppliers and to then protect it by sealing it with one of our specialised EASYSealers, either EASYSeal BCS or EASYSeal Contract. By using lots of water when brushing the product in, it will ensure that any linseed oil will sit on top and simply get washed away! Start once the paving has dried and the joints are drained, applying virtually no pressure to the tool – it is only to finish the joint, not compress it. Whilst not essential, it is strongly recommended to “point” or “strike” the surface of the joints with a suitable finishing tool. It is a product that is easy to use and will maintain the integrity of your beautiful natural stone or cobbled area.

Without a strong foundation the paving will move and the EASYJoint mortar will crack between the paving slabs.Wet the paving, brush in the compound, then strike the joints for a smooth finish and stronger, durable joint.