Airflow QT100T (9041260) Quiet Timer Version Two Speed 100mm Extractor Fan, 9 W, White, Spigot

Product Information

They can be fitted within the area with splashing water (see their full specs) without any risk of electric shock. Suitable for wall or ceiling mounting, the Airflow QT100T is IP45 rated making it suitable for use in bathroom Zone 1 when protected by an RCD.

uk/airflow-quietair-quiet-extractor-fan-with-timer-qt100t 97984 Airflow QuietAir QT100T Extractor Fan with Timer - 9041260 https://www. In addition to being highly efficient, this extractor fan runs so quietly that you’ll hardly even notice it!Stale air can cause a certain level of discomfort and poses a risk of respiratory illness and general poor health. The iCON60 is the largest in its range, and designed to be compatible with larger residential spaces.

It comes factory set and you only need to access the dip switches if you want to change the factory settings. Furthermore, according to the IEE Regulations in the UK, conventional mains voltage fans in a bathroom or shower must be located in places where they cannot be touched by a person using the bath or the shower, as well as away from any water spray. The two-speed options are 75m3/hr and 90m3/hr, and switching between the two is easy (two-speed options), allowing you to choose exactly the right drying pressure needed for the given moment. If a room in the house contains a gas boiler or any other fuel-burning device with a non-balanced flue, it is imperative that there's enough replacement air to prevent fumes from being drawn down the flue when the fan is extracting to its utmost capacity.The whisper quiet QuietAir QT100 is designed to provide powerful extraction levels that exceed the requirements of the latest Building Regulations. This range has sold over 1 million units and is still extremely popular to this day (it has been updated with modern features now, of course). This QuietAir Timer Fan carries the Quiet Mark Approval and is part of an extended range of elegant, discreet axial fans that are extremely quiet with various control options that activate the fan only when needed - the choices are: remote switching, timer, humidity with timer and motion sensor with timer. The Loovent Eco comes in versions which include a pull-cord, humidity timer, motion sensor (with timer), a delayed start of two minutes and two-speed settings.

p>The QuietAir QT100T Extractor Fan is part of a range of elegant, discreet axial fans that are extremely quiet with various control options that activate the fan only when needed. The design includes the option for installing a plug-in module, which enables you to adjust the fan to suit your specific needs. Furthermore, it uses a high-efficiency impeller that helps to keep running costs low; it only has a power consumption of 5 watts.The consequences of condensation in a home include mould growth, peeling wallpaper, and even severe structural damage such as wood rot or dampness. The energy-saving aspect of this model can not be emphasized enough; it has a power consumption of only 5W, used by a long life ball-bearing motor with 40,000 hours of life. Their first product that made waves in the industry was the Loovent, which went on to become a best-seller. The QT100T is stylish and, as the name suggests, very quiet in operation, so will not disturb other occupants during late night toilet trips. According to the Building Regulations Document F1 (2006 Edition), we know the importance of ventilation.

Outdoor air gains entrance through windows, doors and the general ‘leakiness’ of buildings that are not well insulated.It was awarded the Quietmark in 2014 by the Noise Abatement Society as it operates at a lowly 25 decibels (dB). For further information concerning what ventilation fan you require at home, do not hesitate to contact us. This fan has also been designed to deal with a longer duct run when compared to other axial designed fans. In particular, what is recommended and even required by the Building Regs are as follows:Intermittent fans - they operate on an "as required" basis and are turned on or off with the light switch or via other control (such as a pull cord switch). Then, there is the iCON range - one of the first products to introduce the plug-in module concept to the extractor fan market.